********** Start of create / update block icons on 6/8/2016 12:26:37 AM
********** Call from the SIMATIC Manager, type of selected object: Hierarchy Folder
Project template1_Prj, OS: LYN-PC\WinCC Appl.\OS(5)
Picture SMPT1000\Picture(15)
Block icons will be generated/updated for the following blocks:
Project template1_Prj
CFC SMPT1000\\OPERATE
Block 4 of type OP_D, variant: —
Block 5 of type OP_D, variant: —
Block 6 of type OP_A, variant: —
CFC SMPT1000\\CONTROL
Block AIC of type CTRL_PID, variant: —
Block LIC of type CTRL_PID, variant: —
Block PIC of type CTRL_PID, variant: —
Block TIC of type CTRL_PID, variant: —
********** Reading in blocks with operator control and monitoring on 6/8/2016 12:26:37 AM
********** Sending the import file to WinCC on 6/8/2016 12:26:38 AM
Graphic Object Update, File "C:\Program Files\SIEMENS\STEP7\s7proj\template1\temp_Prj\wincproj\OS(5)\THPOFile.csv": Object type "@OP_D/1" could not be found in the template picture. The object "OPERATE/4" , which visualizes the tag "Picture(15).PDL" , placed in picture "OPERATE/4", , requires this template object
Graphic Object Update, File "C:\Program Files\SIEMENS\STEP7\s7proj\template1\temp_Prj\wincproj\OS(5)\THPOFile.csv": Object type "@OP_D/1" could not be found in the template picture. The object "OPERATE/5" , which visualizes the tag
最佳答案
请问是否以PCS7方式编程。如是，请确定在WINCC项目下是否有@PCS7TypicalsAPLV8.pdl（依PCS7版本不同，名称也不同），如有此文件，请确定在此pdl文件是否有该CFC块的图块，如有，请再确定CFC中设定的图块编号是否有误。
提问者对于答案的评价：
!
原创文章，作者：more0621，如若转载，请注明出处：https://www.zhaoplc.com/plc204585.html
微信扫一扫 
支付宝扫一扫 