修改P1121后，点下载后，出现提示框，窗口下面出现提示
Information: ——————————————————————
Information: SINAMICS_S120_CU320: B_INF_02: Consistency check successful
Information: SINAMICS_S120_CU320: CU_S_021: Consistency check successful
Information: SINAMICS_S120_CU320: TM31_03: Consistency check successful
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7042[1] has been exceeded.
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7040[3] has been exceeded.
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7040[2] has been exceeded.
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7040[1] has been exceeded.
Error: Inconsistent parts have been found during the consistency check
Error: Error on: Consistency check
Error: Error during consistency check. (ret = 0xbe130053)
请问这是什么意思呢？我下载完后，在左边一栏中绿色图标上出现两个叹号，表示参数不一致，但我又重新上传了一遍，发现我改的参数已经修改成功！在线修改参数下载需要注意什么问题吗？
请师傅们解释一下！
最佳答案
1、Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7042[1] has been exceeded.
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7040[3] has been exceeded.
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7040[2] has been exceeded.
Error: SINAMICS_S120_CU320: VECTOR_04: The value range of p7040[1] has been exceeded.
表示参数p7040设置参数错误，超出范围。
2、Error: Inconsistent parts have been found during the consistency check
Error: Error on: Consistency check
Error: Error during consistency check. (ret = 0xbe130053)
表示连续性检查错误，和p7040的设置错误有关
3、在左边一栏中绿色图标上出现两个叹号，表示参数不一致
是你现在下传的参数存在了RAM中，和变频器的ROM中讯的参数不一致。如果你要是不把现在RAM中的参数考到ROM中，当下次断电再上电时将恢复到原来的参数。
你可以随时是用菜单或图标COPY RAM TO ROM，把参数保存在ROM中，断电不会丢失。
提问者对于答案的评价：
比较详细,xiexie
原创文章，作者：more0621，如若转载，请注明出处：https://www.zhaoplc.com/plc197205.html
微信扫一扫 
支付宝扫一扫 